Cnidarian Lifeforms from Delrious on Vimeo.

This video taken from Reef Builders

Singgah GV kejap tadi on way beli susu anak =D, saw a lot of new clams and sea horses. Not sure when these arrived, but as for time i visited still have about 2 tanks of clams, size is vary from small to medium.

If not mistaken the its a Crocea Clam. For more info about this clam, please visit this link. Since nothing to tapau back .. i bough 1 of the clam, never try this before but from various of reading, the clam not really need to be feed. Its even helping taking nutrient in tank, so i think its cool for now. The only important thing need to consider is lighting cause its required very high light.

And for the seahorse, please read its requirement, dos and donts before purchase it

Day 28
- WC
- Install new auto feeder
- Clean skimmer's cup
- modified phosban reactor (remove upper section inside reactor and moving the bottom part up) resulted super fast moving pellet. Since its just too fast, decrease pump speed about half
- NO3 - no changes
- PO4 - detected, color indication very light compare to nearest 0.1 ppm (believe its a good thing since NO3 will not reduced if no PO4)

Day 26
- no changes for NO3 and PO4 reading
- shaking reactor

Day 23
- NO3 - 10ppm (lighter than 10ppm color indication)
- PO4 - undetected
- Skimmate - light green with a lot of foam

Day 20
- NO3 - 10ppm (maybe less cause color indicator is lighter) time to change to salifert
- PO4 - undetected (no changes)
- doing WC
- cleaning return pump
- reactor pump seem clog very fast, need to clean and stir the reactor in every 2-3 days (something i dun expect)
- adding 2 vial Bioptim

Day 19
- NO3 - 10ppm, 1st time showing some improvement
- PO4 - undetected
- Coral health - overall is ok except brain coral not opening
- Fish Health - no changes
- lower chiller temp to 25C instead of 26C cause 26C will causing the chiller will kick in at 28C, by doing 25C its always kick in when 26C (dun ask me why its different, i dun know why)
- blow of some ditrius from rock using small pump

Day 18
- clean pump again
- adding the rest of 500ml bio pellet into reactor
- NO3 - 25ppm (no changes)
- PO4 - undetected (no changes)

Day 15
- clean feeder pump to reactor (water flow increase back)
- Water change and skimmer cup maintenance
- NO3 - 25ppm (no changes)
- PO4 - undetected (no changes)

Day 14
- NO3 - 25ppm (no changes)
- PO4 - undetected (no changes)
- Chaeto growth reduced by half
- Open brain not opening like before.
- skim mate consider same

7 days after
- no reading changed for NO3 still at 25ppm
- po4 - still undetected
- add more bio digest
- add more bio pellet

3 days
- NO3 - 25ppm
- PO4 - undetected
- increase feeding times
- re introduced liquid food

Just installed NP Biopellet today... beside that doing normal water change today and removed connected RDSB bucket.

The only thing left in the sump right now just skimmer, chaeto and NP Biopellet.

So for a start the reading for water parameter

NO3 - 25ppm
PO4 - undetected

And for the NP Bio pellet reside in my reactor power by Eheim 1000 compact pump. Even tho i bought 500ml NP Bio pellet, but i just put 1/4 of the volume right now. I'll increase the volume up to my targeted later.

Other than that, i just add 1 ampule of bio digest, hope its can increase bacteria growth ;)